DCE-EN9: Design of a Rectangular CS for Shear and Torsion

The problem consists of a rectangular section, symmetrically reinforced for bending, as shown in the figure. The cross-section is designed for shear force and torsion and the required shear and torsion reinforcement is determined.This is one example of our Verification Manual. You can find the whole manual in SSD and TEDDY via menue Help > Verification Manual, the input data files in TEDDY via menue Help> examples... > verification.

Type Benchmark Beispiel
Productgroup Statik / Dynamik / FEM
Applications Allgemein
Date 27.06.2014
Keywords Design Code Benchmark Example, quality assurance