BE7: Large Deflection of Cantilever Beams I

A cantilever beam is supported as shown in the figure. The beam is subjected to a total vertical load, applied at the tip of the cantilever, which should cause the tip to deflect significantly. The determination of the non-dimensional tip deflections ratios are determined.This is one example of our Verification Manual. You can find the whole manual in SSD and TEDDY via menue Help > Verification Manual, the input data files in TEDDY via menue Help> examples... > verification.

Type Benchmark Beispiel
Productgroup Statik / Dynamik / FEM
Applications Allgemein
Date 27.06.2014
Keywords Benchmark example, quality assurance