BE3: Beam Stresses and Deflections

A rectangular beam is supported as shown in the figure and loaded on the overhangs by a uniformly distributed load. Determine the maximum bending stress in the middle portion of the beam and the deflection at the middle of the beam.This is one example of our Verification Manual. You can find the whole manual in SSD and TEDDY via menue Help > Verification Manual, the input data files in TEDDY via menue Help> examples... > verification.

Type Benchmark Beispiel
Productgroup Statik / Dynamik / FEM
Applications Allgemein
Date 27.06.2014
Keywords Benchmark example, quality assurance