# Simple T-Beam Section¶

A simple T-beam cross section without any inclination.

## Overview¶

NAME | SOFiSTiK_Profile_T-Beam.rfa |

TYPE | Superstructure |

DESCRIPTION | T-Beam |

PICTURE |

## List of Parameter¶

PARAMETER | DIMENSION | DESCRIPTION |
---|---|---|

Width | [Length] | Overall width of the section |

Width_Beam_Bottom | [Length] | Overall width at the bottom surface of the web |

Width_Beam_Top | [Length] | Overall width at the top surface of the web |

Thickness_Deck_Side | [Length] | Outside flange thickness |

Thickness_Deck_Middle | [Length] | Inside flange thickness |

Height_Total | [Length] | Overall height of the cross section |

# Deck Line - single slope¶

## List of Parameter¶

PARAMETER | DIMENSION | DESCRIPTION |
---|---|---|

Thickness_Cover | [Length] | Distance from bridge deck to the axis |

Slope_Deck | [Slope] | Slope of the deck |

Slope_Cantilever | [Slope] | Slope of the cantilever on both sides |

Width_Deck_Right/Left | [Length] | Width of the deck on right/left side of the axis |

Width_Parapet_Right/Left | [Length] | Range of right/left parapet |

Thickness_Cantilever_Right/Left | [Length] | Thickness of right/left cantilever |

Thickness_Cantilever_Edge | [Length] | Thickness of cantilever on the deck’s edge |

Width_Cantilever_Right/Left | [Length] | Width of the right/left cantilever |

BR_R/L | [Length] | Construction point for right/left parapet |

Control_CL_Right/Left | [yes/no] | If activated, Width_Cantilever_Right/Left parameter is taken into account. Otherwise, Width_Cantilever_Right/Left parameter is neglected. Width of cantilever is calculated according to the overall bridge width and Width_Slab_Bottom (for Hollow Box) / Width_Beam (for T-Beam) / Width_Beam and Width_Beam_Axis_Right/Left (for Double T-Beam) parameter(s). Parameter is not available in Superstructure Dialog. Editable in Revit Family Editor. |

Offset_Axis_Horizontal/Vertical | [Length] | Additional horizontal/vertical offset to the axis. |

# Deck Line - double slope¶

## List of Parameter¶

PARAMETER | DIMENSION | DESCRIPTION |
---|---|---|

Thickness_Cover | [Length] | Distance from bridge deck to the axis |

Slope_Deck_Right/Left | [Slope] | Slope of the right/left side of deck |

Slope_Cantilever_Right/Left | [Slope] | Slope on the cantilever on both sides |

Width_Deck_Right/Left | [Length] | Width of the deck on right/left side of the axis |

Width_Parapet_Right/Left | [Length] | Range of right/left parapet |

Thickness_Cantilever_Right/Left | [Length] | Thickness of right/left cantilever |

Thickness_Cantilever_Edge | [Length] | Thickness of cantilever on the deck’s edge |

Width_Cantilever_Right/Left | [Length] | Width of the right/left cantilever |

BR_R/L | [Length] | Construction point for right/left parapet |

Control_CL_Right/Left | [yes/no] | If activated, Width_Cantilever_Right/Left parameter is taken into account. Otherwise, Width_Cantilever_Right/Left parameter is neglected. Width of cantilever is calculated according to the overall bridge width and Width_Slab_Bottom (for Hollow Box) / Width_Beam (for T-Beam) / Width_Beam and Width_Beam_Axis_Right/Left (for Double T-Beam) parameter(s). Parameter is not available in Superstructure Dialog. Editable in Revit Family Editor. |

Offset_Axis_Horizontal/Vertical | [Length] | Additional horizontal/vertical offset to the axis. |

# T-Beam Section¶

## Overview¶

NAME | SOFiSTiK_1_T-Beam_single_slope.rfa / SOFiSTiK_1_T-Beam_double_slope.rfa |

TYPE | Superstructure |

DESCRIPTION | T-Beam cross section with parameterized height and width. |

## List of Parameter¶

PARAMETER | DIMENSION | DESCRIPTION |
---|---|---|

Height_Beam | [Length] | Height of a beam |

Width_Beam_Left/Right | [Length] | Width of a beam on right/left side of an axis |

Offset_Cantilever | [Length] | Distance between cantilever and beam’s edge |

# Double T-Beam Section¶

## Overview¶

NAME | SOFiSTiK_2_T-Beam_single_slope.rfa / SOFiSTiK_2_T-Beam_double_slope.rfa |

TYPE | Superstructure |

DESCRIPTION | Double T-Beam cross section with parameterized width and height of beams and position of beams’ axis. |

## List of Parameter¶

PARAMETER | DIMENSION | DESCRIPTION |
---|---|---|

Width_Beam | [Length] | Width of each beam |

Height_Beam | [Length] | Height of a beam |

Width_Beam_Axis_Right/Left | [Length] | Distance between bridge axis and right/left beam axis |

Offset_Beam_Cantilever | [Length] | Distance between cantilever and beam’s edge |

Offset_Beam_Slab | [Length] | Distance between slab and beam’s edge |

Thickness_Slab_Edge_Beam_Right/Left | [Length] | Thickness of slab at the edge of the right/left beam |

Width_Slab_Transition_Right/Left | [Length] | Distance of variable thickness between beam’s edge and middle slab on right/left side |

# Hollow Box Section¶

## Overview¶

NAME | SOFiSTiK_Hollow_single_slope.rfa / SOFiSTiK_Hollow_double_slope.rfa |

TYPE | Superstructure |

DESCRIPTION | Hollow Box cross section with parameterized height, slabs (top and bottom), haunches (top and bottom) and webs. |

## List of Parameter¶

PARAMETER | DIMENSION | DESCRIPTION |
---|---|---|

Height | [Length] | Overall height of the section |

Thickness_Slab_Top | [Length] | Thickness of middle slab |

Thickness_Haunch_Top | [Length] | Thickness of top haunch |

Width_Haunch_Top | [Length] | Width of top haunch |

Width_Haunch_Transition_Top | [Length] | Distance of variable thickness of top haunch |

Angle_Web | [Angle] | Angle of the web |

Thickness_Web | [Length] | Thickness of the web |

Thickness_Slab_Bottom | [Length] | Thickness of bottom slab |

Width_Slab_Bottom | [Length] | Width of bottom slab |

Thickness_Haunch_Bottom | [Length] | Thickness of bottom haunch |

Width_Haunch_Bottom | [Length] | Width of bottom haunch |

Width_Haunch_Transition_Bottom | [Length] | Distance of variable thickness of bottom haunch |

Angle_Haunch_Transition_Bottom | [Angle] | Angle of bottom haunch |

Control ANG_HNC | [yes/no] | If activated, Angle_Haunch_Transition_Bottom parameter is taken into account. Otherwise, distance of variable thickness of bottom haunch is calculated using Width_Haunch_Transition_Bottom parameter. |

# Parapet¶

This parapet section can be used as a superstructure object along the bridge axis.

## Overview¶

NAME | SOFiSTiK_Profile_Parapets_Left.rfa / SOFiSTiK_Profile_Parapets_Right.rfa |

TYPE | Superstructure |

DESCRIPTION | parapet |

PICTURE |

## List of Parameter¶

PARAMETER | DIMENSION | DESCRIPTION |
---|---|---|

Neig_li / Neig_re | [Length] | Inclination to surface parapet |

b1_li / b1_re | [Length] | Width of parapet outside superstructure |

2_li / b2_re | [Length] | Width of parapet inside superstructure |

b_FB_lie / b_FB_re | [Length] | Offset parapet to main bridge axis |

h1_li / h1_re | [Length] | Height parapet below bridge deck surface |

D_PIER_bottom | [Length] | pier thickness bottom level |

h_Belag | [Length] | Height of pavement |