Views¶

Creates sections and a top view according to the chosen axis. Sections can be created at the placements’ station, between the placements with defined layout rule or at selected custom station. Top view is created with horizontal alignment parameters of the selected axis.

  1. Click SOFiSTiK Bridge tab > Shop Drawings panel > icon_Views (Views)

  2. Select an Axis

    SOFiSTiK: Views dialog displays.

    ../../_images/mpic_views_dialog.png
  3. Select stationing, orientation and rotation of sections.

  4. Decide whether or not to create a plan view with horizontal annotation elements and confirm with OK.

  5. Section and/or plan views are created, you can find them in the project browser and place on the sheet.

You can simultaneously create dimensioning lines and place them in generated sections. In order to do it, you need to annotate the Bridge Profile in Revit Family Editor and load it into project. All of the dimensioning lines, that are not assigned to parameter will be placed on created section views.

Tip

While dimensioning the Bridge Profile in Revit Family Editor, note to assign at least one witness line to the profile line. Otherwise, created dimensions can be incorrect.

Note

Sections created with Views tool are automatically updated after changes in the axis. It may happen, however, that not all of annotations will remain and some will have to be deleted.

Note

If Consider Rotation checkbox is active, created views will be rotated according to the reference placements.

Tip

If an axis was created using interpolation points (csv/txt/xyz formats) or 3D curve, additional checkbox ‘Create at imported coordinate points’ will appear. If activated, all stations of interpolation points will be automatically taken into account.