Axis

Create

Creates an axis according to the chosen alignment parameters with additional elements, like placements and variables, and dependent axis.

Bridge Components and substructure elements can be created with dependency to the axis.

You can find more information about axis definition in SOFiSTiK: Axis dialog section.

  1. Click SOFiSTiK Bridge tab > Create panel > icon_Axis (Axis) drop-down > icon_Axis_Create (Create)

  2. In Alignment tab, you can define horizontal and vertical alignment and placements along an axis.

  3. In Variables tab, you can define variables, which represent the variations along an axis. Variables can be later assigned to the parameters while creating or editing Superstructure.

  4. In Dependent Axes tab, you can define additional dependent axis with U, V offsets.

  5. Confirm with OK.

Edit

Edits previously created axis. You can easily apply any changes in SOFiSTiK Axis dialog and update your axis.

  1. Click SOFiSTiK Bridge tab > Create panel > icon_Axis (Axis) drop-down > icon_Axis_Edit (Edit)

  2. Select an axis.

    SOFiSTiK: Axis dialog displays with previous input data.

  3. Adjust the parameter values and other settings and confirm with OK.

  4. The axis and all the elements connected to edited axis are updated according to the current definition.

Note

Modify the axis carefully. All of the elements, that are connected to the axis will be updated automatically. Consider disconnecting some elements before editing the axis.

Disconnect

Disconnects an axis from all other elements. Disconnected elements lose the dependency to the axis and won’t be updated after editing the axis.

  1. Click SOFiSTiK Bridge tab > Create panel > icon_Axis (Axis) drop-down > icon_Axis_Disconnect (Disconnect)
  2. Select an axis.
  3. Components and Substructure elements are disconnected from selected axis.

Export

You can export an axis definition to an external file (JSON extension). Exported axis can be imported to the same or other Revit project.

  1. Click SOFiSTiK Bridge tab > Create panel > icon_Axis (Axis) drop-down > icon_Axis_Export (Export)

  2. Select an axis.

    SOFiSTiK: Select Source File window displays.

    ../../_images/mpic_axis_export_dialog.png
  3. Select a target directory and file’s name and confirm with Save.

Note

In order to export an axis to JSON file, the project has to be previously saved.

Import

You can import an axis definition from external file. More information regarding supported formats you can find here:

  1. Click SOFiSTiK Bridge tab > Create panel > icon_Axis (Axis) drop-down > icon_Axis_Import (Import)

    SOFiSTiK: Axis Import dialog displays.

    ../../_images/mpic_axis_import_dialog.png
  2. Select the source file and confirm with OK.

  3. In case you have chosen LandXML, CDB or CSV/TXT/XYZ format, additional Axis Import dialog displays. For more information check the supported formats above.

  4. Select proper settings and confirm with OK.

  5. Axis is imported into the project.

From Curve

You can create an axis from any 3D curve in the project. Axis geometry and position will be defined according to the curve’s geometry and cannot be changed in Axis Dialog. In order to update an axis geometry, you need to repeat the command and activate ‘Update existing Axis’ checkbox in SOFiSTiK: Axis from curve dialog.

  1. Click SOFiSTiK Bridge tab > Create panel > icon_Axis (Axis) drop-down > icon_Axis_From_Curve (From Curve)

    SOFiSTiK: Axis from curve dialog displays.

    ../../_images/mpic_axis_from_curve.png
  2. Select the stationing type and confirm with OK.

  3. Axis is created.

Stationing:

  • Horizontal projection - Stations will be calculated according to the horizontal projection of an axis.
  • Arc length - Stations will be calculated along the axis accoring to the actual curve length

Note

Selected curve has to be continous.

Note

In case the stationing of created axis is not in the direction that you expected, you can change the direction using Reverse command.

Reverse

You can reverse the direction of the chosen axis. The stationing will be calculated starting from another end of an axis. Any already properties, like placements and variables, will remain and new stations will be calculated.

  1. Click SOFiSTiK Bridge tab > Create panel > icon_Axis (Axis) drop-down > icon_Axis_Reverse (Reverse)
  2. Select an axis.
  3. Axis direction is reversed.

Note

Selected curve has to be continous.