Parapets Profile

You can use Parapets command to create bridge parapets along the chosen edge. Generated object is an adaptive component family, which is constructed using loft funtionality with the adaptive profiles.

You can find 2 types of parapet profile in the installation directory.

C:\ProgramData\Autodesk\ApplicationPlugins\sofistik_infrastructure_extension_2018.bundle\Contents\data

Parapet Profile

Parapet Profile Vertical

You can use already prepared Revit Families, customize them or create your own ones.

Customization

If you want to customize your own parapet:
  • Copy one parapet profile, rename it and save it locally
  • Open the family and change the parameters or geometry according to your wish. Move Point Elements or add new ones.
  • Use ‘Spline Through Points’ command to create a closed loop between the points.

Tip

While creating a loop, select two points and click on the ‘Spline Through Points’ command. Othwerwise you can meet some difficulties while creating the loop.

_images/mpic_parapets_profile_points.png

Parapet Profiles have defined points, which determine the proper orinetation of the parapet profile along an edge. These points are crucial for curved and sloped bridges.

Parapet Profile Points:
  1. Adaptive point, that defines the position of the parapet in respect of the chosen edge.
  2. Adaptive point, that defines the direction of parapet profile according to the bridge deck and the width of the parapet on the deck (Offset input in SOFiSTiK: Parapets Dialog)
  3. Adaptive point, that defines the vertical direction of the parapet outside of the bridge deck.

Note

Point ‘1’ is necessary in the parapet profile definition. Points ‘2’ and ‘3’ are not necessary, however the geometry will not be adjusted in the respect of, an Offset input (in dialog) and curved and sloped bridge geometry.