SOFiSTiK Forum

It is currently Tue Dec 10, 2019 7:09 am

All times are UTC




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Problem with Tendon.
PostPosted: Sat Jun 01, 2013 5:02 am 
Offline

Joined: Sat Mar 16, 2013 12:41 pm
Posts: 7
Well, I can't run the tendon successfully in my project.
The problem is:

*** Start: Program WPS - Version 27.12.8


*** Start: Program TENDON : Tendons

TENDON - Prestressing Tendons - V 12.10-27 Windows_NT
Input file ModelSNL10.#001
Output on file ModelSNL10.lst
Grafic output on file ModelSNL10.plb 121 status 0
CDBase is working multi-user-/multi-task-mode
Memory allocated : 2048 datablocks with length 540
Project data base ModelSNL10.cdb - 10. access
Project:
Tabelle: tendon.tab
forrtl: severe (157): Program Exception - access violation

Image PC Routine Line Source
tendon.exe 00579F28 Unknown Unknown Unknown
tendon.exe 004AC664 _BRK_RECORDS_mp_R 3446 ap_records.f90
tendon.exe 004A8EBC _BRK_RECORDS_mp_R 2978 ap_records.f90
tendon.exe 004A3B61 _BRK_RECORDS_mp_R 2137 ap_records.f90
tendon.exe 00413BD0 _GSGRAF_SLAB 1366 gs_graf.f90
tendon.exe 00411418 _GSGRAF_STRU 828 gs_graf.f90
tendon.exe 0040FF19 _GS_GRAF_MAIN 650 gs_graf.f90
tendon.exe 00401CFB _GS_MAIN 174 _gs_main.f90
tendon.exe 00402C70 _ROOT 213 _root_batch.f90
tendon.exe 0057B7E2 _MAIN__ 187 fmain_dl.for
tendon.exe 0057B0B3 Unknown Unknown Unknown
tendon.exe 005788B0 Unknown Unknown Unknown
kernel32.dll 75AF33AA Unknown Unknown Unknown
ntdll.dll 773E9EF2 Unknown Unknown Unknown
ntdll.dll 773E9EC5 Unknown Unknown Unknown
*** Stop : Program TENDON : Tendons

*** Process canceled, error detected !

I've tried a lot of thing in other projects, no problem it runs without a hitch. Sadly in my main project it always giving me the error, or what ever that is, regardless of the content in the tendon, one short, strait cables or a lot of curved ones. I don't know if it's relevant, but it gives me that error only when tendon has no errors or warnings, when there is a warning or a regular error it completes whit out the above error. This thing also is locking my model after.


Top
 Profile  
 
 Post subject: Re: Problem with Tendon.
PostPosted: Fri May 13, 2016 4:46 pm 
Offline

Joined: Wed Apr 27, 2016 4:25 pm
Posts: 3
Hallo!

Ich habe dieses Topic über google gefunden, und obwohl er sehr alt ist, habe ich das gleiche Problem.

Bei der Berechnung eines Volumens tritt folgender Fehler auf, weiß jemand woran das liegen könnte?


---------------------------------------

*** Start: Programm ASE : LF 1002 BEZ 'Flächenlast 500kN'

SOFiSTiK 2016-0 ASE - ADVANCED SOLUTION ENGINE (V 16.00_x64 Windows)
Ausgabe auf Datei Volumen 0-90_V05.plb
Projektdatenbasis Volumen 0-90_V05.cdb - 6. Zugriff
Projekt: Modell
Lastfall 1002

Parameter des Gleichungssystems 3
(Sparse Direct Solver)
Anzahl Gleichungen 1984359
forrtl: severe (157): Program Exception - access violation
Image PC Routine Line Source
ase.exe 00007FF7541B0D1B SPARSE_LDL 198 sparsex.f90
ase.exe 00007FF754148D25 SPARSE_mp_SPARSE_ 427 sparse.f90
ase.exe 00007FF7541D5960 DSOL_TRIX 129 dsol_tri.f90
ase.exe 00007FF753D66CC9 TTRIN 106 ttrin.f90
ase.exe 00007FF753AB13C7 ROOT 179 ase.f90
ase.exe 00007FF7542E50A2 Unknown Unknown Unknown
ase.exe 00007FF7542E4556 MAIN__ 99 fmain.for
ase.exe 00007FF7542E3C0E Unknown Unknown Unknown
ase.exe 00007FF7542DF95B Unknown Unknown Unknown
KERNEL32.DLL 00007FFBD2ED8102 Unknown Unknown Unknown
ntdll.dll 00007FFBD32CC5B4 Unknown Unknown Unknown
forrtl: severe (157): Program Exception - access violation
*** Stop : Programm ASE : LF 1002 BEZ 'Flächenlast 500kN'

*** Berechnung abgebrochen, Fehler aufgetreten !


Top
 Profile  
 
 Post subject: Re: Problem with Tendon.
PostPosted: Wed May 25, 2016 6:14 am 
Offline
User avatar

Joined: Thu Jan 10, 2002 10:06 am
Posts: 804
Es gibt ja inzwischen das Servicepack 4, das mit SONAR geholt werden kann. Kommt dieser Fehler in ASE auch mit diesem aktuellen Servicepack ? Wenn JA: Die Eingabe bitte an den Support schicken.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group