SOFiSTiK Forum

It is currently Mon Oct 14, 2019 6:56 am

All times are UTC




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Thu Dec 04, 2014 3:00 pm 
Offline

Joined: Wed Mar 26, 2014 6:48 pm
Posts: 8
Hi!
During calculation of the bridge I get several warnings that I don't understand.
In AQB:
1.
+++++ warning no. 107 in program AQBLS
Internal stresses LC 6045 CSR 2, values for unused material 3The analysis of the eigen stress has been probably done with a section
with a higher construction stage than the current load case assignement
or with the inclusion of standard reinforcements

2. This warning is happening because i didn't give torsional contribution. Do I need to add torsional contribution or I can just ignore warning and sum torsional and long. reinforcement
+++++ warning no. 411 in program AQBBMP
No reinforcement for torsion available for section 1

In CSM:
3. Why is this warning happening:
+++++ warning no. 120 in program STAB
For prestressed beams or composite beams AQB is used in any case
for creep and shrinkage. Only with CTRL WARN 120 you can enforce analys
without AQB. But then the corresponding AQB inner stresses are missing.

4. Same warning in CSM and AQB
+++++ warning no. 107 in program AQBLS
Internal stresses LC 6045 CSR 1, values for unused material 2The analysis of the eigen stress has been probably done with a section
with a higher construction stage than the current load case assignement
or with the inclusion of standard reinforcements

If you need any other info or files please let me know. Thanks


Top
 Profile  
 
PostPosted: Mon Jan 04, 2016 3:47 pm 
Offline

Joined: Mon Jan 04, 2016 11:46 am
Posts: 1
Hello!

Does somebody know what can that warning mean?
It occurs while I´m recalculating ella: Traffic Loader after preparing traffic load cases in Traffic Loader Task.

+++++ warning no. 904 in program ELSG
allocated memory does not allow incore procedure for the next step
to hold 507 vectors with 55048 unknowns the program needs 55832743
9199 14072 55832744

Thank you!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group